document number: 88941 for technical ques tions within your region, please cont act one of the following: www.vishay.com revision: 23-oct-09 diodesamericas@vishay.com , diodesasia@vishay.com , diodeseurope@vishay.com 1 high-voltage trench mos barrier schottky rectifier ultra low v f = 0.39 v at i f = 5 a v30100s, vf30100s, vb30100s, vi30100s vishay general semiconductor new product features ? trench mos schottky technology ? low forward voltage drop, low power losses ? high efficiency operation ? low thermal resistance ? meets msl level 1, per j-std-020, lf maximum peak of 245 c (for to-263ab package) ? solder bath temperature 275 c maximum, 10 s, per jesd 22-b106 (for to-220ab, ito-220ab, and to-262aa package) ? compliant to rohs directive 2002/95/ec and in accordance to weee 2002/96/ec typical applications for use in high frequency converters, switching power supplies, freewheeling diodes , or-ing diode, dc-to-dc converters and reverse battery protection. mechanical data case: to-220ab, ito-220ab, to-263ab and to-262aa molding compound meets ul 94 v-0 flammabi lity rating base p/n-e3 - rohs compliant, commercial grade terminals: matte tin plated leads, solderable per j-std-002 and jesd 22-b102 e3 suffix meets jesd 201 class 1a whisker test polarity: as marked mounting torque: 10 in-lbs maximum primary characteristics i f(av) 30 a v rrm 100 v i fsm 250 a v f at i f = 30 a 0.69 v t j max. 150 c v30100s vf30100s vi30100s vb30100s to-220ab to-263ab to-262aa tmbs ? ito-220ab 2 1 3 pin 1 pin 2 pin 3 k 1 k 2 3 nc a k heatsink nc a k pin 1 pin 2 pin 3 pin 1 pin 2 case pin 3 1 2 3 maximum ratings (t a = 25 c unless otherwise noted) parameter symbol v30100s vf30100s vb30100s vi30100s unit maximum repetitive pe ak reverse voltage v rrm 100 v maximum average forward rectified current (fig. 1) i f(av) 30 a peak forward surge current 8.3 ms single half sine-wave superimposed on rated load i fsm 250 a non-repetitive avalanche energy at t j = 25 c, l = 90 mh e as 230 mj peak repetitive reverse current at t p = 2 s, 1 khz, t j = 38 c 2 c i rrm 1.0 a voltage rate of change (rated v r ) dv/dt 10 000 v/s isolation voltage (ito-220ab only) from terminal to heatsink t = 1 min v ac 1500 v operating junction and storage temperature range t j , t stg - 40 to + 150 c
www.vishay.com for technical qu estions within your region, please contact one of the fo llowing: document number: 88941 2 diodesamericas@vishay.com , diodesasia@vishay.com , diodeseurope@vishay.com revision: 23-oct-09 v30100s, vf30100s, vb30100s, vi30100s vishay general semiconductor new product notes (1) pulse test: 300 s pulse width, 1 % duty cycle (2) pulse test: pulse width 40 ms ratings and characteristics curves (t a = 25 c unless otherwise noted) fig. 1 - forward current derating curve fig. 2 - forward power loss characteristics electrical characteristics (t a = 25 c unless otherwise noted) parameter test conditions symbol typ. max. unit breakdown voltage i r = 10 ma t a = 25 c v br 105 (minimum) - v instantaneous forward voltage i f = 5 a t a = 25 c v f (1) 0.47 - v i f = 10 a 0.55 - i f = 30 a 0.80 0.91 i f = 5 a t a = 125 c 0.39 - i f = 10 a 0.49 - i f = 30 a 0.69 0.78 reverse current v r = 70 v t a = 25 c i r (2) 27 - a t a = 125 c 11 - ma v r = 100 v t a = 25 c 70 1000 a t a = 125 c 23 45 ma thermal characteristics (t a = 25 c unless otherwise noted) parameter symbol v30100s vf30100s vb30100s vi30100s unit typical thermal resistance r jc 2.0 4.0 2.0 2.0 c/w ordering information (example) package preferred p/n unit weight (g) pac kage code base quantity delivery mode to-220ab v30100s-e3/4w 1.875 4w 50/tube tube ito-220ab vf30100s-e3/4w 1.805 4w 50/tube tube to-263ab vb30100s-e3/4w 1.380 4w 50/tube tube to-263ab vb30100s-e3/8w 1.380 8w 800/reel tape and reel to-262aa vi30100s-e3/4w 1.455 4w 50/tube tube 35 30 25 20 15 10 5 0 0 25 50 75 100 125 150 average forwar d current (a) ca s e temperature (c) mounted on s pecic heat s ink vf30100 s v(b,i)30100 s re s i s tive or inductive load 0 4 8 12 16 20 24 28 32 0 4 8 12162024283236 average forward current (a) average power lo ss (w) d = t p /t t p t d = 0.1 d = 0.2 d = 0.3 d = 0.5 d = 0.8 d = 1.0
document number: 88941 for technical ques tions within your region, please cont act one of the following: www.vishay.com revision: 23-oct-09 diodesamericas@vishay.com , diodesasia@vishay.com , diodeseurope@vishay.com 3 v30100s, vf30100s, vb30100s, vi30100s vishay general semiconductor new product fig. 3 - typical instantaneous forward characteristics fig. 4 - typical reverse characteristics fig. 5 - typical j unction capacitance fig. 6 - typical transient thermal impedance fig. 7 - typical transient thermal impedance 0.1 1 10 100 0 0.2 0.4 0.6 0.8 1.0 1.2 in s tantaneou s forward voltage (v) t a = 150 c t a = 125 c t a = 25 c in s tantaneou s forward current (a) 0.001 0.01 0.1 1 10 100 1000 10 20 30 40 50 60 70 80 90 100 percent of rated peak rever s e voltage (%) in s tantaneou s rever s e current (ma) t a = 150 c t a = 125 c t a = 25 c 100 1000 10 000 0.1 1 10 100 rever s e voltage (v) junction capacitanc e (pf) 0.001 0.01 0.1 1 10 0.01 0.1 1 10 100 t - pul s e duration ( s ) tran s ient thermal impedance (c/w) junction to ca s e v(b,i)30100 s 1 10 0.01 0.1 1 10 100 t - pul s e duration ( s ) junction to ca s e vf30100 s tran s ient thermal impedance (c/w)
www.vishay.com for technical qu estions within your region, please contact one of the fo llowing: document number: 88941 4 diodesamericas@vishay.com , diodesasia@vishay.com , diodeseurope@vishay.com revision: 23-oct-09 v30100s, vf30100s, vb30100s, vi30100s vishay general semiconductor new product package outline dimensions in inches (millimeters) to-220ab 0.113 (2.87) 0.103 (2.62) 0.370 (9.40) 0.360 (9.14) 0.415 (10.54) max. 0.635 (16.13) 0.625 (15.87) pin 0.160 (4.06) 0.140 (3.56) 0.057 (1.45) 0.045 (1.14) 0.105 (2.67) 0.095 (2.41) 0.104 (2.65) 0.096 (2.45) 0.205 (5.20) 0.195 (4.95) 0.035 (0.90) 0.028 (0.70) 0.154 (3.91) 0.148 (3.74) 1 3 2 0.185 (4.70) 0.175 (4.44) 0.055 (1.39) 0.045 (1.14) 0.145 (3.68) 0.135 (3.43) 0.350 (8.89) 0.330 (8.38) 1.148 (29.16) 1.118 (28.40) 0.560 (14.22) 0.530 (13.46) 0.022 (0.56) 0.014 (0.36) 0.110 (2.79) 0.100 (2.54) 0.603 (15.32) 0.573 (14.55) ito-220ab 0.076 (1.93) ref. 45 ref. pin 3 2 1 0.404 (10.26) 0.384 (9.75) 0.076 (1.93) ref. 0.600 (15.24) 0.580 (14.73) 0.560 (14.22) 0.530 (13.46) 0.057 (1.45) 0.045 (1.14) 0.057 (1.45) 0.045 (1.14) 0.191 (4.85) 0.171 (4.35) 0.671 (17.04) 0.651 (16.54) 0.035 (0.89) 0.025 (0.64) 0.205 (5.21) 0.195 (4.95) 0.025 (0.64) 0.015 (0.38) 0.105 (2.67) 0.095 (2.41) 0.028 (0.71) 0.020 (0.51) 0.110 (2.79) 0.100 (2.54) 7 ref. 0.135 (3.43) dia. 0.122 (3.08) dia. 0.110 (2.79) 0.100 (2.54) 0.190 (4.83) 0.170 (4.32) 7 ref. 7 ref. 0.140 (3.56) dia. 0.125 (3.17) dia. 0.350 (8.89) 0.330 (8.38) to-262aa 0.401 (10.19) 0.381 (9.68) 0.185 (4.70) 0.175 (4.44) 0.055 (1.40) 0.045 (1.14) 0.110 (2.79) 0.100 (2.54) 0.350 (8.89) 0.330 (8.38) 0.560 (14.22) 0.530 (13.46) 0.022 (0.56) 0.014 (0.35) k 123 0.055 (1.40) 0.047 (1.19) 0.510 (12.95) 0.470 (11.94) pin 0.411 (10.45) max. 0.250 (6.35) min. 30 (typ.) (ref.) 0.035 (0.90) 0.028 (0.70) 0.205 (5.20) 0.195 (4.95) 0.104 (2.65) 0.096 (2.45) 0.057 (1.45) 0.045 (1.14) 0.160 (4.06) 0.140 (3.56) 0.950 (24.13) 0.920 (23.37) to-263ab 0.670 (17.02) 0.591 (15.00) 0.105 (2.67) 0.095 (2.41) 0.08 (2.032) min. 0.15 (3.81) min. 0.33 (8.38) min. 0.42 (10.66) min. nc a k k 0.140 (3.56) 0.110 (2.79) 0.021 (0.53) 0.014 (0.36) 0.110 (2.79) 0.090 (2.29) 0 to 0.01 (0 to 0.254) 0.055 (1.40) 0.047 (1.19) 0.055 (1.40) 0.045 (1.14) 0.190 (4.83) 0.160 (4.06) 0.205 (5.20) 0.195 (4.95) 0.624 (15.85) 0.591 (15.00) 0.037 (0.940) 0.027 (0.686) 0.105 (2.67) 0.095 (2.41) 0.360 (9.14) 0.320 (8.13) 0.411 (10.45) 0.380 (9.65) 0.245 (6.22) min. mounting pad layout
document number: 91 000 www.vishay.com revision: 11-mar-11 1 disclaimer legal disclaimer notice vishay all product, product specifications and data ar e subject to change without notice to improve reliability, function or design or otherwise. vishay intertechnology, inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectivel y, vishay), disclaim any and all liability fo r any errors, inaccuracies or incompleteness contained in any datasheet or in any o ther disclosure relating to any product. vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. to the maximum extent permitted by applicab le law, vishay disc laims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, incl uding without limitation specia l, consequential or incidental dama ges, and (iii) any and all impl ied warranties, including warran ties of fitness for particular purpose, non-infringement and merchantability. statements regarding the suitability of pro ducts for certain types of applications are based on vishays knowledge of typical requirements that are often placed on vishay products in gene ric applications. such statements are not binding statements about the suitability of products for a partic ular application. it is the customers responsibility to validate that a particu lar product with the properties described in th e product specification is su itable for use in a particul ar application. parameters provided in datasheets an d/or specifications may vary in different applications and perfo rmance may vary over time. all operating parameters, including typical pa rameters, must be validated for each customer application by the customers technical experts. product specifications do not expand or otherwise modify vishays term s and conditions of purchase, including but not limited to the warranty expressed therein. except as expressly indicated in writing, vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the vishay product co uld result in person al injury or death. customers using or selling vishay products not expressly indicated for use in such applications do so at their own risk and agr ee to fully indemnify and hold vishay and it s distributors harmless from and against an y and all claims, liabilities, expenses and damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that vis hay or its distributor was negligent regarding the design or manufact ure of the part. please contact authorized vishay personnel t o obtain written terms and conditions regarding products designed fo r such applications. no license, express or implied, by estoppel or otherwise, to any intelle ctual property rights is gran ted by this document or by any conduct of vishay. product names and markings noted herein may be trademarks of their respective owners.
|
